HT SERIES PUSHER TUNNEL FURNACE

Features

  • 1430C Maximum Temperature Rating
  • Air/Nitrogen Capability
  • Gas Tight Chamber
  • Independent Temperature Control in Each Zone
  • Active Cooling
  • 5C Cross Belt Uniformity
  • Automatic circulation hydraulic pusher
  • Adjustable exhaust capacity
  • Custom Voltage Configuration
  • Low Oxygen Content <= 10PPM
high temperature atmosphere control conveyor belt furnace

Applications

One of the major applications is to process different LiFe2PO4 materials including ferrous oxalate, ferric oxide, and ferric phosphate, etc. using single-row, two-row, four-row pusher (straight type, circulation type), or AB combined air/atmosphere controlled pusher kiln.

Advantages

  • Large Scale Production
  • Uniform and Stable Temperature Control
  • Exhaust and Drainage System

HT Series Pusher Tunnel Furnace Models


Typical Configuration Control Zone
Maximum Temp RT - 1430 C
Atmosphere Air / Nitrogen
Chamber Width 12 in (30 cm) - 26.7in (68 cm)
Above Board Clearance* 9 in (23 cm)
Heated zones* 5 - 12
Overall system length* 39 ft (1200cm) - 92 ft (2800cm)

* Highly customizable according to specific requirement.